聚合物对旋流器内油滴聚结与分离效率的影响

为了研究聚合物对水力旋流器内油滴聚结与分离效率的影响规律,以螺旋导流内锥式旋流器为研究对象,利用群体平衡模型(PBM)方法对不合聚与含聚0.5‰工况下油水两相在旋流器内的速度场、黏度场、油滴聚结、运移特性及分离效率进行数值分析,并通过实验验证.结果 表明:聚合物的加入增大了水相黏度,使油滴在旋流器内最大停留时间与轴向运动距离增加,增加了油滴碰撞聚结的机会,但降低轴心处油滴向上运动的轴向速度,使油滴无法快速从溢流口流出,最终从底流口流出,增加油水分离的难度.与不合聚时相比,含聚0.5‰工况下,轴心处的油滴粒径与含油体积分数较高,但简化分离效率由99.79％降低至94.72％.通过马尔文粒度仪对两种工况下入口与出口的油滴粒径进行测试,含聚0.5‰时溢流与底流口油滴粒径高于不合聚时,验证了模拟的准确性.     

软化+微滤膜工艺处理填埋场渗滤液的中试研究

以阜阳市某生活垃圾填埋场渗滤液为研究对象,针对渗滤液高硬度、低碱度的特点,考查软化+微滤膜中试工艺对填埋场总硬度的处理效能,分析微滤膜运行参数对膜通量和产水流量的影响.中试结果表明:软化+微滤膜工艺可有效去除水源中钙镁离子污染问题,控制软化装置的反应池pH在11.5,总硬度(以CaCO3计)的去除率在94％以上,出水总硬度(以CaCO3计)稳定<100 mg/L.软化微滤工艺对渗滤液中COD的平均去除率为16.2％.单支微滤膜正常运行,反洗频率30 min时,可将膜通量恢复至初始通量的90％以上.由中试可知,微滤膜具有良好的抗污染性能,在进膜污泥浓度为4.97 g/L及以上时,初始膜通量仍能保持较高值.     

IκB激酶β在肿瘤中的作用及其抑制剂的研究进展

近年来，IκB激酶β（inhibitor kappa B kinaseβ, IKKβ）在肿瘤发生发展过程中的作用逐渐被发现。IKKβ通过作用多种分子通路参与肿瘤细胞增殖、存活等过程，抑制IKKβ已被确定为治疗癌症有希望的手段。研究人员开发一系列IKKβ抑制剂，发现它们能够有效抑制肿瘤的生长，但目前尚无IKKβ抑制剂投入到临床上治疗癌症。在这篇综述中，我们将介绍IKKβ介导肿瘤发生发展及主要IKKβ抑制剂的研究进展。     

基于1D CNN与XGBoost的恶意代码纹理检测

恶意代码数量已经呈现爆炸式增长,对于恶意代码的检测防护显得尤为重要.近几年,基于深度学习的恶意代码检测方法开始出现,基于此,提出一种新的检测方法,将恶意代码二进制文件转化为十进制数组,并利用一维卷积神经网络(1 Dimention Convolutional Neural Networks,1D CNN)对数组进行分类和识别.针对代码家族之间数量不平衡的现象,该算法选择在分类预测上表现良好的XGBoost,并对Vision Research Lab中的25个不同恶意软件家族的9458个恶意软件样本进行了实验.实验结果表明,所提的方法分类预测精度达到了97％.     

马鞍山市新型城镇化建设与经济发展分析

文章主要探讨马鞍山市新型城镇化建设与经济发展现状,分析马鞍山市新型城镇化与经济发展中存在的突出问题,有针对性地提出相应的政策建议.     

反坦克导弹用热电池研究进展

反坦克导弹作为击毁坦克和其他装甲目标的武器装备,在国家安全领域具有重要地位.热电池作为反坦克导弹的能源系统,对导弹功能实现具有重要意义.围绕反坦克导弹用热电池快激活和瞬时高比功率技术,结合热电池电化学材料体系发展历史、现状,探讨了提升快激活能力,提高瞬时比功率输出能力的技术,并对技术发展趋势进行了展望.     

Achieving fabrication of highly transparent Y2O3 ceramics via air pre-sintering by deionization treatment of suspension

An easy albeit quite effective deionization suspension treatment was adopted to alleviate the detrimental effects related to the hydrolysis of Y₂O₃ in an aqueous medium. Fabrication of highly transparent Y₂O₃ ceramics with a fine grain size via air pre-sintering and post–hot isostatic pressing (HIP) treatment without using any sintering additive was achieved using the treated suspensions. The hydrolysis issue of Y₂O₃ powder in an aqueous medium was effectively alleviated by using deionization treatment, and a well-dispersed suspension with a low concentration of dissolved Y³⁺ species was obtained. The dispersed suspensions were consolidated by the centrifugal casting method, and the green bodies derived from the suspension of 35.0 vol% solid loading showed an improved homogeneity with a relative density of 52.1%. Fully dense Y₂O₃ transparent ceramic with high transparency was obtained by pre-sintering consolidated green compacts at a low temperature of 1400°C for 16 h in air followed by a post-HIP treatment at 1550°C for 2 h under 200 MPa pressure. The sample had a fine average grain size of 690 nm. The in-line transmittance of the sample reached 83.3% and 81.8% at 1100 nm and 800 nm, respectively, very close to the theoretical values of Y₂O₃.     

Research on phase shift characteristics of electromagnetic wave in plasma

The phase shift characteristics reflect the state change of electromagnetic wave in plasma sheath and can be used to reveal deeply the action mechanism between electromagnetic wave and plasma sheath. In this paper, the phase shift characteristics of electromagnetic wave propagation in plasma were investigated. Firstly, the impact factors of phase shift including electron density,collision frequency and incident frequency were discussed. Then, the plasma with different electron density distribution profiles were employed to investigate the influence on the phase shift characteristics. In a real case, the plasma sheath around the hypersonic vehicle will affect and even break down the communication. Based on the hypersonic vehicle model, we studied the electromagnetic wave phase shift under different flight altitude, speed, and attack angle. The results indicate that the phase shift is inversely proportional to the flight altitude and positively proportional to the flight speed and attack angle. Our work provides a theoretical guidance for the further research of phase shift characteristics and parameters inversion in plasma.     

二次喷丸诱导应力及变形工程预测方法

为建立二次喷丸的等效分析方法,在单次喷丸诱导应力及饱和度已知的情况下,进行金属零件二次喷丸的诱导应力和变形的工程预测.以单次喷丸的饱和度曲线为分析基础,讨论了二次喷丸饱和度与喷丸时间的变化规律.用正弦函数的形式表达喷丸诱导应力,并建立了零件的平均诱导应力和饱和度之间的关系.结果表明:针对弹丸尺寸不同的二次喷丸过程,进行了基于多弹丸随机喷丸技术的有限元仿真,得到的喷丸诱导应力与理论结果相差5％左右;针对喷丸压力不同的二次喷丸过程,使用标准阿尔门试片进行了喷丸试验,试片变形与理论结果相差3％左右.仿真和试验结果均表明提出的预测方法有效、准确,可较好地预测二次喷丸后零件的残余应力和变形.     

数控机床大功率DC-DC转换器设计与控制

针对数控机床行业中使用的大功率DC-DC转换器,提出一种适用于大功率应用场合的LCL型dc/dc转换器的改进设计方法.基于零无功功率和有功功率平衡条件,结合电压和电流的P-Q理论方法,设计LCL型dc/dc变换器以实现更高的电压阶跃比,并限制电容器电压.依据提出的方法设计转换器参数,并搭建仿真模型对设计方案进行验证.仿真结果显示,转换器能实现300 kV/20kV的大功率DC-DC转换,电压阶跃比高且系统稳定性较好.说明所提出设计方法可用于数控机床中大功率高阶跃比DC-DC转换器设计与控制.